SNE CAP H- & V- Photocatalytic Air Purification

Home / SNE CAP H- & V- Photocatalytic Air Purification

Multi-photocatalytic air cleaning systems for mounting in air handling systems

Elimination of micro-organisms and odors for a pleasant and healthy indoor climate
In order to provide spaces with fresh, cool or warm air, many buildings are equipped with an air treatment system, in which air is extracted from the individual spaces and, if desired, it is cooled, heated and (partially) refreshed and redistributed throughout the building.

These systems thus ensure a pleasant indoor climate and are barely or not perceptible to the people present in the building.

However, the conditions in these systems are often ideal for the growth of microorganisms and if a source is present in one room, it will spread throughout the property. The dark, dusty and humid conditions in the air ducts are an ideal breeding ground for the growth of bacteria, viruses and fungi. Filters in air handling systems are not fine enough to stop micro-organisms and will not stop odors or volatile substances, in fact; filters will start to spread unpleasant odors themselves over time.

The SNE CAP devices use UV/photocatalytic technology to eliminate micro-organisms. By using ultraviolet light in combination with photocatalyst, the micro-organisms in the air are killed and odors and volatile compounds are oxidized. By using multiple photocatalytic materials, the effectiveness against various contaminants is increased. These applied technologies (MCI) have been developed and patented by SNE itself.

The optimal placement in an air ventilation system is on the intake side where the air to be recirculated is drawn from the rooms, in this way micro-organisms, volatile substances and odors are neutralized before they are circulated through the air treatment system. But the device can also be used in other places and in other types of air treatment systems for effective air purification.

The SNE CAP devices are easy to install and can be installed inside or partially outside the air duct. Making a few holes and connecting the power supply (220V) is sufficient to start using the device.

In addition to use in air circulation systems, the SNE CAP devices are also suitable for installation in professional air purifiers, drying cabinets and ventilation systems.

The SNE-CAP models are available in 2 versions

  • CAP-H, these models have been developed for use in air ducts with the focus on the recirculation ducts that draw the air from the rooms for recirculation through the air handling unit. These models produce some ozone which, as the air travels some distance through the air ducts, breaks down again.
  • CAP-V, these models do not produce ozone and can therefore be mounted where the purified air is blown directly into the room, which can be in all kinds of situations, from HVAC system to air purifier or point extractor.

In addition to these 2 models, there is also a VBO series, these devices have been developed for application against odors and can be used in extraction installations (catering or industrial) or in a recirculating system for air disinfection where there are no people in the room at that time. present. Because these devices produce much more ozone, the VBO models are not intended for recirculation in locations where people are present. These VBO devices are available as CAP (single UV/photocatalytic cell) and FAP (two UV/photocatalytic cell) versions.

SNE CAP H V photocatalytic air purification
sne air purifiers

Downloads

Overview of properties

  • UV Photocatalytic Air Purification for HVAC Systems
  • Quick and easy to install in an air duct or air handling unit
  • Available for HVAC systems with medium ozone, with high ozone for odor control and without ozone for professional air purifiers or air conditioners
  • Effective against micro-organisms and volatile substances
  • Fights viruses, bacteria and fungi
  • Prevents the spread of germs in the office, commercial building, ship and/or offshore installation
  • Photocatalysis to enhance the air-disinfecting effect of UV light
  • Various versions available for different air volumes, applications and room sizes
  • Air purification without filters
  • Stable operation with a UV cell life of approx. 8,000 hours
Multi photocatalytic odor control

Specifications

SNE CAP-H (production of some ozone)

Model
CAP – 20H
CAP – 40H
CAP – 60H
CAP – 80H
CAP – 100H
CAP – 100Hz

For floor space
10 – 20 m²
20 – 40 m²
40 – 60 m²
60 – 80 m²
60 – 120 m²
80 – 150 m²

For air transit
400 – 600 m³/uur
600 – 800 m³/uur
800 – 1.000 m³/uur
1.000 – 2.000 m³/uur
1.000 – 3.000 m³/uur
2.000 – 4.000 m³/uur

UV Cel
1x 127 mm
1x 127 mm
1x 127 mm
1x 127 mm
1x 212 mm
1x 287 mm

Wattage
<5W
<5W
<5W
<5W
<9W
<12W

Specifications

SNE CAP-V (ozone-free)

Model
CAP – 80V
CAP – 100V
CAP – 100HV

For floor space
40 – 60 m²
60 – 120 m²
60 – 150 m²

For air transit
100 – 1.000 m³/uur
100 – 3.000 m³/uur
100 – 4.000 m³/uur

UV Cel
1x 127 mm
1x 212 mm
1x 287 mm

Wattage
<5W
<9W
<12W

Video

Video SNE air purifiers